THE ULTIMATE CRACK REPAIR ROD FOR TI, ALL ABRASION RESISTANT PLATES AND CAST STEEL OR ANY COMBINATION THEREOF
QSS 325TI is an excellent smooth running all position welding alloy in the hands of the professional and occasional welder. It is designed for joining application requiring high impact and twisting properties on all low, medium carbon and low alloyed steels. It produces crack free deposits of x-ray quality.
Applications: QSS 325TIhas been successfully used for the repair of frames on trucks, dozers, log stacker masts, grapple loaders, goose necks, forks and cast steel housings. It can be used for welding SPS – 245 and PERMA SPIKES. Non work hardening and can be cut with a torch.
|Tensile strength||96,000 PSI/661 MPa|
|Tensile strength||106,000 PSI/730 MPa|
|Charpy V-Notch Impact @ 0F – 46 ft. lb.|
|Amps (rod)||Amps (wire)||Voltage (wire)|
|3/32 inch DIA. = 70-90||.045 inch DIA. = 140-250||23-30 volt flat position|
|1/8 inch DIA. = 90-140||1/16 inch DIA. = 165-300 25lb. spools and 60lb. coils||22-26 volt vertical and over head position. Must be used with gas (75/25 or 98-2)|
|5/32 inch DIA. = 125-170|
|3/16 inch DIA. = 145-215 (special order)|